Quick dating
Custom Menu
  • Desi cam online
  • tvia online dating
  • Adult couple video chat rooms
  • NEWS
    Hopefully, people don’t just want my opinion on anything, but rather want to know what the Bible says on the issue. Our free dating site is a great way to find an amazing women from Russia, Ukraine and other countries of the Easten Europe.

    Updating image u boot Xxx dating pics

    For the APF51 and U-Boot versions 2013.04 or later you can also use files with the U-Boot command: Warning: Before setting the firmware_autoload variable, be sure that your FPGA binary file is correct.If not, your board will hang up at U-Boot start and you will need to cancel the fpga download to take control of the board.

    updating image u boot-79updating image u boot-43

    Note: This article assumes that you already have U-Boot running on the target. your board is completely empty, see the RBL, UBL and host program article for instructions on how to get U-Boot bootloader on your board first.After you did this and have U-Boot running on your board, you can go on with steps below.Alternatively, you can program your NAND flash with JTAG.Load address: 0x200000 Loading: ########################### done Bytes transferred = 393216 (60000 hex) Un-Protected 3 sectors ... 16 I2C: ready DRAM: 512 MB (ECC not enabled, 533 MHz, CL4) FLASH: 64 MB NAND: 128 Mi B PCI: Bus Dev Ven Id Dev Id Class Int PCIE1: link is not up. done Protected 1 sectors Protected 1 sectors = reset U-Boot 2009.11.1 (Feb 05 2010 - ) CPU: AMCC Power PC 460EX Rev.Run the following commands (please, be aware you are downloading u Boot for your module – you may want to use a different branch e.g.instead of “uboot_initial_changes” use u-boot-2gb or u-boot-512mb): # cd /home/fedevel/ltib/rpm/BUILD/ # git clone -b uboot_initial_changes https://github.com/FEDEVEL/imx6rex-u-boot-2009.08# cd imx6rex-u-boot-2009.08/ # ./build_# sudo cp /tftp/ 4.Often times it is useful to write the image of the kernel for your device into a permanent storage media such as NAND flash.This eliminates the need to download the kernel image each time the system is booted.The next step is to prepare TFTP client software for file transfer between Linux host computer and your Windows computer.Download & Install TFTPD32 on your local Windows machine.The easiest way to get access to the U-boot source code is by downloading and installing the Processor SDK Linux.Once installed, the U-Boot source code is included in the SDK's board-support directory.If you use Virtual Box or VMware make sure you have selected Bridge Mode for the network adaptor, otherwise the U-Boot cannot talk to your host.

    Leave a Reply

    Pages: [1] 2 3 4 5 6 | Next | Last


    Copyright © 2017 - 2020 - efisakh.ru